1. Boards
  2. FRDM-KE06Z

FRDM-KE06Z

NXP
FRDM-KE06Z
VSCode with the Arm Keil Studio extension

Accelerate your application development with example projects

Import your chosen project to Keil Studio for VS Code or Keil Studio Cloud, or download for use in Keil uVision.

Learn more about Keil tools
  • Blinky

    CMSIS-RTOS based Blinky example

    Compatibility: µVision
  • adc_5v12b_ll18_015_interrupt

    The adc_interrupt example shows how to use interrupt with adc driver.In this example, user should indicate a channel to provide a voltage signal (can be controlled by user) as the adc'ssample input. When running the project, typing any key into debug console would trigger the conversion. ADC interrupt would be asserted once the conversion is completed. In ADC ISR, the conversion completed flag would be cleared by reading the conversion result value. Also, the conversion result value is stored, and the ISR counter is increased. These information would be printed when the execution return to the main loop.The point is that the adc interrupt configuration is set when configuring the adc's conversion channel. When in software trigger mode, the conversion would be launched by the operation of configuring channel, just like writing aconversion command. So if user wants to generate the interrupt every time the conversion is completed, the channel's configuration with enabling interrupt setting would be used for each conversion.

    Compatibility: Keil Studio µVision
  • cmsis_spi_interrupt_b2b_transfer_master

    The spi_interrupt_b2b_transfer example shows how to use spi CMSIS driver in interrupt way:In this example , we need two boards, one board used as spi master and another board used as spi slave.The file 'spi_interrupt_b2b_transfer_master.c' includes the spi master code.This example uses the transactional API in spi driver.1. spi master send/received data to/from spi slave in interrupt .

    Compatibility: Keil Studio µVision
  • ftm_output_compare

    The FTM project is a demonstration program of the SDK FTM driver's output compare feature.It sets up one FTM channel to toggle the output when a match occurs with the channel value. The usershould probe the FTM output with a oscilloscope to see the signal toggling.

    Compatibility: Keil Studio µVision
  • hello_wor

    The HelloWorld demo prints the "Hello World" string to the terminal using the SDK UART drivers and repeat what user input. The purpose of this demo is to show how to use the UART, and to provide a simple project for debugging and further development.

    Compatibility: Keil Studio µVision
  • i2c_interrupt_b2b_transfer_master

    The i2c_interrupt_b2b_transfer_master example shows how to use i2c driver as master to do board to board transfer with interrupt:In this example, one i2c instance as master and another i2c instance on the other board as slave. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

    Compatibility: Keil Studio µVision
  • i2c_polling_b2b_transfer_slave

    The i2c_polling_b2b_transfer_slave example shows how to use i2c driver as slave to do board to board transfer with a polling master:In this example, one i2c instance as slave and another i2c instance on the other board as master. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

    Compatibility: µVision
  • i2c_read_accel_value_transfer

    The i2c_read_accel_value example shows how to use I2C driver to communicate with an i2c device: 1. How to use the i2c driver to read a i2c device who_am_I register. 2. How to use the i2c driver to write/read the device registers.In this example, the values of three-axis accelerometer print to the serial terminal on PC throughthe virtual serial port on board.

    Compatibility: Keil Studio µVision
  • irq

    The IRQ Example project is a demonstration program that uses the MCUXpresso SDK software to useIRQ pin interrupt.The example uses the IRQ pin to generate a falling edge interrupt to show the example.

    Compatibility: Keil Studio µVision
  • k

    The KBI Example project is a demonstration program that uses the KSDK software to usekeyboard interrupt.The example uses one KBI pin to generate a raising edge interrupt to show the example.

    Compatibility: Keil Studio µVision