Ensemble

      - Fix ospi1 rxds pinmux
      - retarget_config.h in layer and example updated to reflect 2.0.0 config file version
      - Fix compilation error in tz config

      - Update layers and examples for AppKit-E7-AIML and DevKit-E7

      - Add Cropping Support for CPI
      - Update E4 SOC part Numbers
      - Add High Speed mode in I2C
      - Fix Code Styling and Clang formatting
      - Fix compilation error with CMSIS v6.2.0
      - Add Example projects for different boards
      - Fix fix the fpscr and vpr offset for PM
      - Use SE service call for gpio flexio config
      - Fix pin assignments for E1C and E8 board
      - Fix counter reading for LPTIMER
      - Fix I2C HW connection comments in template
      - Fix warnings and errors across DFP
      - Fix default waitcycle for IS25xx
      - Add E4 soc support
      - remove se services init call from board_config
      - Update new GPIO instances
      - Update Board support Lib for E1C
      - Fix board based retargeting config
      - Fix testapps names
      - Fix clearing untouched coordinates for touchscreen
      - Updates in I2C, SPI, ADC, I3C, USART, DPHY, PDM, CMP, HWSEM, SD Drivers
      - Update MRAM FLM file
      - I2C Restart feature support
      - LPI3C, LPI2C, LPUTIMER, instance support for E8
      - OSPI HyperRAM XIP demo fixes
      - SE Services updates to FWv107
      - WM8904 support
      - EMMC mode support in SD Driver
      - BMI323 Driver support
      - Board Support Library for DevKit E7, E8
      - Add E8 Support
      - Add E1C Support
      - Restructured DFP
      - Add Csolution Examples

      - Fix the OSPI HyperRAM XIP demo
      - Fix rx transfer in UART irq handler
      - Update SE host services to SE FWv105
      - wm8904 driver support
      - hm360 camera sensor Snapshot-mode support
      - remove WA for P10_7 pinmux issue for OSPI
      - add restart support and peripheral sync support to I2C
      - update msg xfer method for LPI2C

      - Fixed SD, HWSEM App issues
      - Fixed FLM Flashing
      - Fixed CAN-FD build

      - Update SE services to v1.103.0
      - Minor Fixes in PDSC file

      - Power off will wait till all queued data is transmitted in UART
      - update se services to FWv1.101
      - Build fix for LP timer as retargetting uart.
      - BECP-2265 Support for OV5675 Camera Sensor
      - Add LPSPI Blocking mode macro in RTE_Device.h
      - Add ifdef guards for M55 SYSTEM_CLOCK
      - LLVM CLang fixes   - add copy and zero table handling for llvm clang builds
      - Fix CMSIS_6 related Warnings

      - ICM42670 driver
      - New component for MIPI DPHY
      - Support for ILI9488 1-lane Display
      - Support for AR0145 Camera Sensor
      - Support for OV5647 Camera Sensor
      - Updated I3C Driver
      - Baremetal FATFS demo for SD
      - Update SE services to v1.100.0

      - update SD Driver for various fixes
      - Add emmc init sequence
      - Low Capacity SD card support

      - update SE services to 1.97.0

      - CANFD Blocking mode support
      - FreeRTOS test apps for DMA, I2S, ADC
      - Add Support for RAW8 and RGB565 for MT9M114
      - MT9M114-mipi, HM0360 Camera sensor support
      - Polling mode driver for PDM, CAN-FD, I2S, LPSPI
      - SDMMC Driver IRQ mode support
      - Updates in DMA, SPI, I2S, UART, SD, CAN-FD driver
      - Updates in UART, I2C, ADC, PM, SDC, CAN-FD applications
      - Auto timing calculation for CSI
      - Compiler warnings and Error Fixes
      - Change SDMMC default clock to 50MHz
      - Update SE services to v1.96.0

      - Fix FLM file format issue
      - Minor updates to Demo_pm_baremetal and mhu_sender sources
      - Update SE services to v1.0.94

      - Update SE services to v1.0.93

      - Update SE services to v1.0.92
      - Update drivers and testapps
      - Rename HSCMP component as CMP

      Initial release