HT32F62143_48LQFP
-
Core
Cortex-M0+, 40 MHz
-
Family
HT32F62143 Series
-
Sub-Family
HT32F62143
-
CMSIS Pack
HT32_DFP
The Holtek HT32F62143 device is a high performance, low power consumption 32-bit microcontroller based around an Arm® Cortex®-M0+ processor core. The Cortex®-M0+ is a next-generation processor core which is tightly coupled with Nested Vectored Interrupt Controller (NVIC), SysTick timer, and including advanced debug support.
The device operates at a frequency of up to 40 MHz with a Flash accelerator to obtain maximum efficiency. It provides 64 KB of embedded Flash memory for code/data storage and 8 KB of embedded SRAM memory for system operation and application program usage. A variety of peripherals, such as ADC, I2C, USART, UART, SPI, MCTM, GPTM, SCTM, CRC-16/32, RTC, WDT, UID, SW-DP (Serial Wire Debug Port), etc., are also implemented in the device. Several power saving modes provide the flexibility for maximum optimization between wakeup latency and power consumption, an especially important consideration in low power applications.
The device integrates a smoke detector, a buzzer driver and a 3.3 V LDO. The smoke detector incorporates a smoke detector AFE and two programmable constant current channels. It communicates via a one-wire interface. The buzzer driver can drive either an external-driving 2-pin buzzer or a self-driving 3-pin buzzer and support the MCU failure alarm function.
The above features ensure that the device is suitable for use in the smoke detector applications.
Core |
Processor Cortex-M0+ |
---|---|
Maximum Clock Frequency | 40 MHz |
Memory Protection Unit | NO_MPU |
Floating Point Unit | NO_FPU |
Trust Zone | |
Digital Signal Processor | |
CortexM Vector Extensions | |
Endian | Little-endian |
Features | View features |
Processor
Cortex-M0+, 40 MHz
-
I/O IO Pins 21 IO Pins External Interrupts 16 External Interrupts Analog to Digital Converter 9-channel x 9-bit Analog to Digital Converter -
Package LQFP 48-lead LQFP -
Clock External Crystal Oscillator 4 MHz .. 16 MHz External Crystal Oscillator Internal RC Oscillator 8 MHz Internal RC Oscillator Real Time Clock 32.77 kHz Real Time Clock -
Power Operating Voltage 2 V .. 3.6 V Operating Voltage Run,Sleep,Deep-Sleep1,Deep-Sleep2,Power-Down 5 Run,Sleep,Deep-Sleep1,Deep-Sleep2,Power-Down -
Spec Operating Temperature Range -40 °C .. +85 °C Operating Temperature Range -
Timer BFTM 2 x 32-bit BFTM SCTM with single PWM 4 x 16-bit SCTM with single PWM GPTM with Quadrature Decoder 1 x 16-bit GPTM with Quadrature Decoder MCTM with Complementary Outputs 1 x 16-bit MCTM with Complementary Outputs Watchdog Timer 1 x Watchdog Timer -
Communication Universal Synchronous Asynchronous Receiver Transmitter 1 x 0 bit/s Universal Synchronous Asynchronous Receiver Transmitter Universal Asynchronous Receiver Transmitter 2 x 0 bit/s Universal Asynchronous Receiver Transmitter Serial Peripheral Interface 2 x 0 bit/s Serial Peripheral Interface Inter-Integrated Circuit 2 x Inter-Integrated Circuit -
Other CRC 1 x CRC