STM32H7B3I-DK

STMicroelectronics STM32H7B3I-DK Board

• Debug Interfaces
  ST-Link	Micro-USB
  JTAG/SW	10-pin Cortex Debug connector (0.05 inch connector)
  JTAG/SW	10 pin Cortex Debug connector (TAG-Connect footprint)

• Debug
  Integrated Debug Adaptor	1 x On-board ST-LINK-V3E

• Other
  Crystal Oscillator	32.77 kHz 32.768 kHz Crystal Oscillator
  Crystal Oscillator	24 MHz 24 MHz Crystal Oscillator
  Other Feature	1 x 802.11 b/g/n compliant WiFi module

• Power
  Power Supply	5 V .. 5 V USB ST-Link
  Power Supply	5 V .. 5 V External Supply (E5V)
  Power Supply	5 V .. 5 V USB HS
  Power Supply	7 V .. 12 V External Supply (VIN)
  Power Supply	5 V .. 5 V USB charger

• Memory
  Flash	1 x 512-Mbit Octal-SPI NOR Flash memory
  RAM	1 x 128-MBit SDRAM
  SD/microSD/MMC Card Holder	1 x microSD Card Holder

• Connectors
  USB	1 x USB OTG HS with Micro-AB connector
  I2C	1 x 8-Pin socket, 2.54 mm pitch
  CAN	1 x 2-Pin header, 2.54 mm pitch
  Other Connector Type	1 x 30-pin Camera connector
  Other Connector Type	1 x 2 x 10 pin male 1.27 mm-pitch Audio connector
  Other Connector Type	1 x 50-pin TFT LCD touchscreen connector

• Audio
  Line In	1 x 3.5 mm Stereo jack
  Line Out	1 x 3.5 mm Stereo jack

• Controls
  Push-buttons	2 Push-buttons: User and Reset

• Form factor
  Custom Formfactor	0 mm x 0 mm, STMod+ connector
  Arduino Formfactor	Arduino Uno V3 connector

• Display
  LEDs	2 x 2 User LEDs
  GLCD	480 x 272 480 x 272 Pixel 4.3 inch Color TFT LCD with capacitive touchscreen