STMicroelectronics STM32H747I-EVAL Evaluation Board Support and Examples

• Debug Interfaces
  JTAG/SW	20-pin JTAG (0.1 inch connector)
  JTAG/SW	20-pin Cortex debug + ETM Trace (0.05 inch connector)
  ST-Link	Micro-USB

• Debug
  Integrated Debug Adaptor	1 x On-board ST-LINK/V2

• Memory
  RAM	1 x 8M x 32-bit SDRAM
  RAM	1 x 1M x 16-bit SRAM
  Flash	1 x 8M x 16-bit Nor Flash
  Flash	1 x 1-Gbit Twin Quad-SPI or two 512-Mbit Quad-SPI NOR Flash memories
  SD/microSD/MMC Card Holder	1 x SDIO interface microSD card

• Connectors
  USB	1 x High-Speed USB with micro-AB Connector
  USB	2 x Full-Speed USB with micro-AB Connector
  CAN	1 x CAN
  RS232	1 x RS232
  I2C	4 x I2C
  Ethernet	1 x 0 bit/s 10/100 Ethernet Port
  Other Connector Type	1 x Motor control connector

• Controls
  Joystick	1 x 5-position Joystick
  Push-buttons	3 Push-Buttons for Reset, Wakeup/Tamper or Key
  Potentiometer	1 x Analog Voltage Control for ADC Input (potentiometer)

• Display
  LEDs	4 x 4 color user LEDs
  GLCD	800 x 480 4-inch 800x480 TFT color LCD with MIPI DSI interface and capacitive touchpanel

• Audio
  Line In	1 x Audio CODEC with Stereo Line-In/Out and Speaker/Microphone
  Line Out	1 x Audio CODEC with Stereo Line-In/Out and Speaker/Microphone
  Microphone	2 x ST MEMS microphones
  Speaker	2 x Speaker

• Other
  Other Feature	1 x Digital Stereo Microphone
  Crystal Oscillator	25 MHz Crystal Oscillator

• Power
  Power Supply	5 V - 0 V USB Powered
  Power Supply	3 V - 5 V External Supply

• I/O
  Digital I/Os	34 x Motor Control Connector
  Digital I/Os	60 x Daughterboard Extension header 1
  Digital I/Os	60 x Daughterboard Extension header 2