1. Boards
  2. STM32H735G-DK

STM32H735G-DK

Rev.B
STMicroelectronics
STM32H735G-DK

STM32H735G-DK Discovery kit

Overview

The STM32H735G-DK Discovery kit is a complete demonstration and development platform for Arm® Cortex®-M7 core-based STM32H735IGK6 microcontroller, with 1 Mbyte of flash memory and 564 Kbytes of SRAM.

The STM32H735G-DK Discovery kit is used as a reference design for user application development before porting to the final product, thus simplifying the application development.

The full range of hardware features available on the board helps users to enhance their application development by an evaluation of all the peripherals (such as USB OTG FS, Ethernet, microSD™ card, USART, CAN FD, SAI audio DAC stereo with audio jack input and output, MEMS digital microphone, HyperRAM™, Octo‑SPI flash memory, RGB interface LCD with capacitive touch panel, and others). ARDUINO® Uno V3, Pmod™ and STMod+ connectors provide easy connection to extension shields or daughterboards for specific applications.

STLINK-V3E is integrated into the board, as the embedded in-circuit debugger and programmer for the STM32 MCU and USB Virtual COM port bridge.

Getting started

ST-LINK driver installation and firmware upgrade (on Microsoft Windows)

  1. Download the latest ST-LINK driver.
  2. Extract the archive and run dpinst_amd64.exe. Follow the displayed instructions.
  3. Download the latest ST-LINK firmware upgrade.
  4. Extract the archive and run the ST-LinkUpgrade.exe program.
  5. Connect the board to your PC using a USB cable and wait until the USB enumeration is completed.
  6. In the ST-Link Upgrade program, press the Device Connect button.
  7. When the ST-LINK driver is correctly installed, the current ST-LINK version is displayed.
  8. Press the Yes >>>> button to start the firmware upgrade process.

Technical reference