IMX7-PHYBOARD-ZETA

PHYTEC
IMX7-PHYBOARD-ZETA
  • Core

    Cortex-A7

    Cortex-M4

  • Device

    MCIMX7D7

The phyBOARD-i.MX7 Zeta SBC is a two-PCB counterpart to the phyCORE-i.MX7 SOM. The SOM itself serves as the CPU core of the SBC. The SBC is formed by interfacing the SOM to a second Carrier Board PCB via high density connectors.

  • Memory
    RAM 1 x 1GB DDR3
    ROM 1 x 4GB eMMC
    Memory 4.09 Kbyte EEPROM
    MemCard 1 x Micro SD Card slot
  • Connectors
    ETH 2 x 1 Gbit/s RJ45
    USB 1 x USB Host Standard-A connector
    USB 1 x USB-OTG Micro-AB connector
    CAN 1 x 2x5 header
    RS232 1 x 2x5 header
    I2C 2 x Expansion Bus - I2C
    ConnOther 1 x Expansion Bus - USB 2.0 Host HSIC
    ConnOther 5 x Expansion Bus - UART
    ConnOther 1 x Expansion Bus - CAN
    ConnOther 1 x Expansion Bus - SDIO/SD/MMC
    ConnOther 2 x Expansion Bus - eCSPI
    ConnOther 3 x Expansion Bus - Tamper
    ConnOther 2 x Expansion Bus - PWM
    ConnOther 1 x Expansion Bus - GPIO
    ConnOther 1 x Expansion Bus - 3x3 Keypad
    ConnOther 1 x Expansion Bus - MIPI CSI
    ConnOther 1 x Expansion Bus - MIPI DSI
    ConnOther 1 x Expansion Bus - JTAG
    ConnOther 1 x HDMI - requires PEB-AV-01 adapter
    ConnOther 1 x Display and Touch - requires PEB-AV-02 adapter
  • Display
    LED 1 x User LED
  • Other
    Other 1 x Mini PCIe socket
    Other 1 x RTC
  • I/O
    AIO 4 x Expansion Bus - ADC
  • Form factor
    CustomFF 100 mm x 72 mm, Custom Formfactor