FRDM-MCXL255

The lpuart_polling Example project is to demonstrate usage of the KSDK lpuart driver.In the example, you can send characters to the console back and they will be printed out onto console instantly.

The lpuart_polling_seven_bits Example project is to demonstrate usage of the KSDK lpuart driver with seven data bits feature enabled.In the example, you can send characters to the console back and they will be...See more details in readme document.

The magnetic_switch example demonstrates communication with the on-board I2C magnetic switch NMH1000. The value of magnetic field strength is read from the magnetic switch and print to terminal.

This example demonstrate features of low power modes.

The QTMR project is a demonstration program of the SDK QTMR driver's input capture and output pwm feature.The example sets up a QTMR channel for input capture. Once the input signal is received,this example will...See more details in readme document.

The QTMR project is a simple demonstration program of the SDK QTMR driver to use QTMR as a timer.The quad-timer module provides four timer channels with a variety of controls affecting both individualand...See more details in readme document.

The FLASIAP project is a simple demonstration program of the SDK FLASIAP driver. It erases and programs a portion of on-chip flash memory. A message a printed on the UART terminal as various operations on flash memory are performed.

The runbootloader project is a simple demonstration which run into the bootloader with the user parameter. The demo forces the device run into the ISP mode with the specific peripheral.

The RTC project is a demonstration program of the SDK RTC driver. It sets RTC working on free run mode. It enables both alarm0 and alarm1. Alarm0 works in repeated mode, alarm occurs every 2 seconds. Alarm1 works in...See more details in readme document.

The RTC project is a demonstration program of the SDK RTC driver working on time date mode. The program sets the time and date, watchdog and tamper. 3 alarms are enabled, alarm0 is single shot, alarm1 and alarm2 are...See more details in readme document.