EVK-MIMXRT1064
-
Core
Cortex-M7
-
Device
MIMXRT1064DVL6A -
CMSIS Pack
EVK-MIMXRT1064_BSP
-
MassStorage
Keil Studio, µVision AC6USB Mass Storage Device using SD/MMC Memory Card or RAM as storage media
Download Pack -
MassStorage
Keil Studio, µVision AC6USB Host file manipulation example: create, read, copy, delete files from USB Mass Storage Device and format the storage device
Download Pack -
SMTP_Client
Keil Studio, µVision AC6Example showing how to compose and send emails
Download Pack -
SNMP_Agent
Keil Studio, µVision AC6Example showing how to use a Simple Network Management Protocol (SNMP)
Download Pack -
Telnet_Server
Keil Studio, µVision AC6Command-line Host service example using Telnet protocol
Download Pack -
USB Device HID
Keil Studio, µVision AC6USB Human Interface Device providing access from PC to board LEDs and push buttons.
Download Pack -
USB Host Keyboard
Keil Studio, µVision AC6USB HID Keyboard as input device
Download Pack -
VirtualCOM
Keil Studio, µVision AC6Virtual COM Port example: bridges UART port of the eval board to a Virtual COM Port on the PC using the Communication Device Class (CDC) of USB Device
Download Pack -
WinUSB_Echo
Keil Studio, µVision AC6WinUSB Class Device echoing bulk endpoint data (implemented as Custom Class)
Download Pack -
adc_12b1msps_sar_interrupt
Keil Studio, µVision AC6The adc_interrupt example shows how to use interrupt with adc driver.In this example, user should indicate a channel to provide a voltage signal (can be controlled by user) as the adc'ssample input. When running the project, typing any key into debug console would trigger the conversion. ADC interrupt would be asserted once the conversion is completed. In ADC ISR, the conversion completed flag would be cleared by reading the conversion result value. Also, the conversion result value is stored, and the ISR counter is increased. These information would be printed when the execution return to the main loop.The point is that the adc interrupt configuration is set when configuring the adc's conversion channel. When in software trigger mode, the conversion would be launched by the operation of configuring channel, just like writing aconversion command. So if user wants to generate the interrupt every time the conversion is completed, the channel's configuration with enabling interrupt setting would be used for each conversion.
Download Pack