MAX32650_EVKIT

REV 3.0 Maxim
MAX32650_EVKIT
  • Core

    Cortex-M4

  • Debug probe

    JTAG/SW

    JTAG/SW

  • Device

    MAX32650

The MAX32650 Evaluation Kit provides a convenient platform for evaluating the capabilities of the MAX32650 Family of microcontrollers. The Evaluation Kit also provides a complete, functional system ideal for developing and debugging applications. This Evaluation Kit supports both the MAX32650 and the MAX32651 (Trust Protection Unit (TPU) enabled).

  • Power
    PWR 3.3 V - 5.5 V Power Supply
  • Connectors
    Proto 13 x 11 13 x 11 Prototyping Area with one row connected to 1.8V PWR, one row connected to 3.3V PWR and one row connected to GND
    SPI 4 x 3 x SPI Master and 1 x SPI Slave ports mapped on GPIO
    I2C 3 x Up to 3 x I2C Master Ports, 1 x I2C Slave (shares same I/O as each of the master ports)
    RS232 4 x 1 UART, either UART0 or UART1, can be connected to the USB Micro B connector (CN1) via jumpers (JP10, JP12, JP13 and JP14). RTS/CTS hardware flow control are supported via USB as well. The remaining 3 UARTS are mapped to GPIO headers.
  • Memory
    Memory 16 byte MB SPI Flash
  • I/O
    DIO 49 x General Purpose IO on 3 x 16 pin headers, JH1-JH3, and 1 pin on JH4
    AIO 4 x Analog Inputs on 4 x 2 pin headers
  • Display
    LED 4 x User LEDs
    GLCD 128 x 32 pixel graphic OLED display module. User connectable to SPI0 via jumpers
  • Other
    Other 1 x External Bluetooth 4.0 Low Energy transceiver with chip antenna
    XTAL 120 MHz Crystal Oscillator