1. Boards
  2. XMC4800 Automation Board

XMC4800 Automation Board

XMC4800 Automation Board

XMC4800 Automation Board Support and Examples

  • Debug Interfaces
    JTAG/SW 10-pin Cortex Debug Connector (0.05 inch connector)
  • Other
    Crystal Oscillator 14.4 MHz Crystal Oscillator
    Crystal Oscillator 32.77 KHz 32k on-board crystal
  • Memory
    RAM 1 x 64Mb SDRAM
    Flash 1 x Cypress FM25CL64B, 64-Kbit (8K × 8) Serial (SPI) F-RAM
  • Connectors
    USB 1 x USB Device (Micro-AB)
    Ethernet 1 x 100 Mbit/s Ethernet RJ45 Plug, Würth
    CAN 1 x DB9 Male Connector
  • Controls
    Other Control 2 x EtherCAT Slave IN and OUT interface via RJ45 jack
    Other Control 2 x 2x10 Signal Header for ISOFACE outputs/inputs and 24V supply
    Push-buttons 1 RESET
  • Display
    LEDs 3 x User RGB LED, EtherCAT LED_RUN, LED_ERR
  • Power
    Battery 1 x CR2032 Battery for RTC