MSPM0G5115

• Core

  Cortex-M0+, 80 MHz

• Family

  MSPM0G511X_G518X Series

• Sub-Family

  MSPM0G511X

• CMSIS Pack

  MSPM0G511X_G518X_DFP

The MSPM0G511x and MSPM0G518x microcontrollers (MCUs) are part of MSP's
highly-integrated, low-power 32-bit MCU family based on the enhanced Arm®
Cortex®-M0+ 32-bit core platform operating at up to 80-MHz frequency.
These MCUs offer a blend of cost optimization and design flexibility for
applications requiring 32KB to 128KB of flash memory in small packages
(down to 4 mm x 4 mm) or high pin count packages (up to 64 pins).
These devices include cybersecurity enablers, high performance
integrated analog, and provide excellent low power performance across the
operating temperature range.

Up to 128 KB of embedded flash program memory with built-in error correction
code (ECC) and up to 32 KB SRAM with ECC and parity protection is provided.
The flash memory is organized into two main banks to support field firmware
updates, with address swap support provided between the two main banks.

A USB 2.0 full-speed interface (with integrated PHY) is provided to support
compliant device and host mode functionality. Four Unified Communication
Modules (UNICOMM) are provided to combine infrastructure elements and an
efficient overlaid serial peripherals, supporting up to three UART, two I2C,
or two SPI. Digital audio interface is provided for a variety of audio
applications and support multiple protocols such as I2S and TDM.

Flexible cybersecurity enablers can be used to support secure boot, secure
in-field firmware updates, IP protection (execute-only memory), key storage,
and more. Hardware acceleration is provided for a variety of AES symmetric
cipher modes. The cybersecurity architecture is pending Arm PSA Level 1
certification.

A set of high performance analog modules is provided, such as one sampling
12-bit 1.6-Msps ADCs supporting up to 26 external channels, on-chip voltage
reference (1.4V or 2.5V), and one high speed comparators with built-in 8-bit
reference DAC.