HT32F67593_28LGA
-
Core
Cortex-M0+, 64 MHz
-
Family
HT32F67593 Series
-
Sub-Family
HT32F67593
-
CMSIS Pack
HT32_DFP
The Holtek HT32F67593 device is a high performance, low power consumption 32-bit microcontroller based around an Arm? Cortex?-M0+ processor core which runs the Bluetooth? LE (BLE) protocol stack and applications. The Cortex?-M0+ is a next-generation processor core which is tightly coupled with Nested Vectored Interrupt Controller (NVIC), SysTick timer, and including advanced debug support.
The device operates at a frequency of up to 64 MHz with a Flash accelerator to obtain maximum efficiency. It provides 1024 KB encryptable in-system Flash memory with 16 KB cache controller for code/data storage, 128 KB of embedded SRAM memory for system operation and application program usage and 192 KB of embedded ROM memory for preprogrammed embedded RTX-RTOS kernel, driver library, and BLE lower layer protocol stack software. A variety of peripherals, such as BLEC, DMAC, STIM, GPTM, WDT, RTC, SPI, DSPI, QSPI, UART, I2C, SCI, IrDA, I2S, PCM, AES128, TRNG, QEI, ADC, TSEN and SW-DP (Serial Wire Debug Port), etc., are also implemented in the device. Several power saving modes provide the flexibility for maximum optimization between wake-up latency and power consumption, an especially important consideration in low power applications.
The above features ensure that the device is suitable for use in a wide range of BLE products such as handheld products, health care products, home appliances, smart device information beacons, data loggers, human interface device service, etc.
| Core |
Processor Cortex-M0+ |
|---|---|
| Maximum Clock Frequency | 64 MHz |
| Memory Protection Unit | NO_MPU |
| Floating Point Unit | NO_FPU |
| Trust Zone | |
| Digital Signal Processor | |
| CortexM Vector Extensions | |
| Endian | Little-endian |
| Features | View features |
Processor
Cortex-M0+, 64 MHz
-
Power Operating Voltage 1.8 V .. 3.6 V Operating Voltage Run,Sleep,Deep-Sleep1,Deep-Sleep2 4 Run,Sleep,Deep-Sleep1,Deep-Sleep2 -
Spec Operating Temperature Range -40 °C .. +85 °C Operating Temperature Range -
I/O External Interrupts 16 External Interrupts Analog to Digital Converter 1-channel x 1-bit Analog to Digital Converter IO Pins 16 IO Pins -
Timer GPTM 3 x 3-bit GPTM Watchdog Timer 1 x Watchdog Timer -
Communication Universal Asynchronous Receiver Transmitter 2 x 0 bit/s Universal Asynchronous Receiver Transmitter Serial Peripheral Interface 2 x 0 bit/s Serial Peripheral Interface Inter-Integrated Circuit 2 x Inter-Integrated Circuit -
Package LGA 28-contacts LGA -
Other BLEC 1 x BLEC DMAC 1 x DMAC STTM 1 x STTM DSPI 1 x DSPI QSPI 1 x QSPI HSQPI 1 x HSQPI IrDA 1 x IrDA PCM 1 x PCM TRNG 1 x TRNG QEI 1 x QEI TSEN 1 x TSEN