Arm Keil MDK v6 Essential and Professional editions are now available to buy as monthly or annual subscriptions from our Developer Tools store. Visit the store to get access to the tools suite today!

  1. Devices
  2. HT32F61352 Series
  3. HT32F61352
  4. HT32F61352

HT32F61352

Holtek
  • Core

    Cortex-M0+, 48 MHz

  • Family

    HT32F61352 Series

  • Sub-Family

    HT32F61352

  • CMSIS Pack

    HT32_DFP

The HOLTEK HT32F61352 device is a high performance, low power consumption 32-bit microcontroller based around an Arm Cortex-M0+ processor core. The Cortex-M0+ is a next-generation processor core which is tightly coupled with Nested Vectored Interrupt Controller (NVIC), SysTick timer and including advanced debug support.

The device operates at a frequency of up to 48 MHz with a Flash accelerator to obtain maximum efficiency. It provides up to 128 KB of embedded Flash memory for code/data storage and 8 KB of embedded SRAM memory for system operation and application program usage. A variety of peripherals, such as ADC, 2-channel DAC, I2C, I2S, USART, UART, SPI, QSPI, GPTM, SCTM, CRC-16/32, RTC, WDT, USB2.0 FS, 32-channel music synthesizer, SW-DP (Serial Wire Debug Port), etc., are also implemented in the device. Several power saving modes provide the flexibility for maximum optimization between wakeup latency and power consumption, an especially important consideration in low power applications.

The HT32F61352 integrates Wave Table synthesis function. It can operate up to 32 channels of Wave Table synthesis at one time and control the MIDI Engine to generate melody by setting the special registers. The Wave Table synthesis waveform is stored in external SPI Flash ROM for application flexibility. With these features, it provides enhanced functions and higher performance.

The above features ensure that the device is suitable for use in a wide range of applications, especially in areas such as electronic organs, digital pianos, electronic drums, electric guitars, electric accordions and so on.

Core

Processor

Cortex-M0+

Maximum Clock Frequency 48 MHz
Memory Protection Unit NO_MPU
Floating Point Unit NO_FPU
Trust Zone
Digital Signal Processor
CortexM Vector Extensions
Endian Little-endian
Features View features

Processor

Cortex-M0+, 48 MHz

  • I/O
    IO Pins 52 IO Pins
    External Interrupts 16 External Interrupts
    Analog to Digital Converter 16-channel x 12-bit Analog to Digital Converter
    Digital to Analog Converter 2 x 16-bit Digital to Analog Converter
  • Package
    48LQFP 48-lead 48LQFP
    64LQFP 64-lead 64LQFP
  • Clock
    External Crystal Oscillator 4 MHz .. 16 MHz External Crystal Oscillator
    Internal RC Oscillator 8 MHz Internal RC Oscillator
    Real Time Clock 32.77 kHz Real Time Clock
  • Power
    Operating Voltage 2 V .. 3.6 V Operating Voltage
    Run,Sleep,Deep-Sleep1,Deep-Sleep2,Power-Down 5 Run,Sleep,Deep-Sleep1,Deep-Sleep2,Power-Down
  • Spec
    Operating Temperature Range -40 °C .. +85 °C Operating Temperature Range
  • Core features
    Peripheral DMA 6-channel Peripheral DMA
  • Timer
    BFTM 2 x 32-bit BFTM
    SCTM with single PWM 4 x 16-bit SCTM with single PWM
    GPTM with Quadrature Decoder 1 x 16-bit GPTM with Quadrature Decoder
    Watchdog Timer 1 x Watchdog Timer
  • Communication
    Universal Serial Bus Device 1 x Universal Serial Bus Device
    Universal Synchronous Asynchronous Receiver Transmitter 1 x 0 bit/s Universal Synchronous Asynchronous Receiver Transmitter
    Universal Asynchronous Receiver Transmitter 1 x 0 bit/s Universal Asynchronous Receiver Transmitter
    SPI 1 x 0 bit/s SPI
    QSPI 1 x 0 bit/s QSPI
    Inter-Integrated Circuit 1 x Inter-Integrated Circuit
  • Other
    CRC 1 x CRC
    DIV 1 x DIV
    Music Synthesis Engine-MSE 1 x Music Synthesis Engine-MSE