MIMXRT1170-EVKB
-
Cores
Cortex-M4
Cortex-M7
-
Device
MIMXRT1176DVMAA -
CMSIS Pack
MIMXRT1170-EVKB_BSP
-
csi_mipi_yuv_cm4
Keil Studio AC6, GCC, IARThis project shows how to use the CSI with MIPI_CSI. In this example, the camera device output pixel format is YUYV, the MIPI_CSI converts it to YUV internally and sends to CSI. In other words, the CSI input data bus width is 24-bit. The CSI saves the frame as 32-bit format XYUV8888. PXP is used to convert the XYUV to RGB565 and show in the LCD panel.
Download Pack -
dac12_basic_cm4
Keil Studio AC6, GCC, IARThe dac12_basic example shows how to use DAC12 module simply as the general DAC12 converter.When the DAC12's fifo feature is not enabled, Any write to the DATA register will replace thedata in the buffer and push data to analog conversion without trigger support.In this example, it gets the value from terminal,outputs the DAC12 output voltage through DAC12 output pin.
Download Pack -
dac12_basic_cm4
Keil Studio, µVision AC6The dac12_basic example shows how to use DAC12 module simply as the general DAC12 converter.When the DAC12's fifo feature is not enabled, Any write to the DATA register will replace thedata in the buffer and push data to analog conversion without trigger support.In this example, it gets the value from terminal,outputs the DAC12 output voltage through DAC12 output pin.
Download Pack -
dac12_fifo_interrupt_cm4
Keil Studio, µVision AC6The dac12_fifo_interrupt example shows how to use DAC12 FIFO interrupt.When the DAC12 FIFO watermark interrupt is enabled firstly, the application would enter the DAC12 ISR immediately, since remaining FIFO data is less than the watermark. Then the FIFO would be feed inside the ISR. Then the DAC12 interrupt could be restrained. Once the DAC12 FIFO is triggered in while loop, the data in FIFO is read out, then it becomes less than the watermark, so the FIFO would be feed again in DAC12 ISR. With this example, user can define the DAC12 output array to generate the different wave output. Also the software trigger can be called in some timer ISR so that the DAC12 would output the analog signal in indicated period. Or even use the hardware trigger to release the CPU.
Download Pack -
dac12_fifo_interrupt_cm4
Keil Studio AC6, GCC, IARThe dac12_fifo_interrupt example shows how to use DAC12 FIFO interrupt.When the DAC12 FIFO watermark interrupt is enabled firstly, the application would enter the DAC12 ISR immediately, since remaining FIFO data is less than the watermark. Then the FIFO would be feed inside the ISR. Then the DAC12 interrupt could be restrained. Once the DAC12 FIFO is triggered in while loop, the data in FIFO is read out, then it becomes less than the watermark, so the FIFO would be feed again in DAC12 ISR. With this example, user can define the DAC12 output array to generate the different wave output. Also the software trigger can be called in some timer ISR so that the DAC12 would output the analog signal in indicated period. Or even use the hardware trigger to release the CPU.
Download Pack -
dcic_cm4
Keil Studio AC6, GCC, IARThis example shows how to use DCIC to monitor the display content integrity.
Download Pack -
dcic_cm4
Keil Studio, µVision AC6This example shows how to use DCIC to monitor the display content integrity.
Download Pack -
deepviewrt_camera_label_image_cm7
µVision AC6DeepViewRT Camera Label Image example shows the demonstration of real-time object recognition using DeepViewRT on an IMXRT platform together with a camera and LCD module. The firmware uses a user defined model and real-time camera to image classifier.
Download Pack -
deepviewrt_image_detection_cm7
Keil Studio, µVision AC6DeepViewRT Image Detection example shows the demonstration of image detection using DeepViewRT on an IMXRT platform. The application will identify multiple objects in a single image and output the result via UART console.
Download Pack -
deepviewrt_modelrunner_cm7
µVision AC6DeepViewRT ModelRunner is a dedicated service for hosting and evaluating RTM graphs through a set of RPC protocols, it provides an HTTP REST API for loading an evaluating models. It can work with eIQ toolkit to evaluating and profiling models.
Download Pack