LPCXpresso802
-
Core
Cortex-M0+
-
Device
LPC802M001JDH20 -
CMSIS Pack
LPCXpresso802_BSP
-
lpc_bod
Keil Studio, µVision AC6The bod example shows how to use LPC BOD(Brown-out detector) in the simplest way. To run this example, user should remove the jumper for the power source selector, and connect the adjustable input voltage to the MCU's Vin pin. If the input voltage of the Vin pin is lower than the threshold voltage, the BOD interrupt will be asserted.
Download Pack -
lpc_i2c_interrupt_b2b_transfer_master
Keil Studio, µVision AC6The i2c_interrupt_b2b_transfer_master example shows how to use i2c driver as master to do board to board transfer with interrupt:In this example, one i2c instance as master and another i2c instance on the other board as slave. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.
Download Pack -
lpc_i2c_interrupt_b2b_transfer_master
Keil Studio AC6, GCC, IARThe i2c_interrupt_b2b_transfer_master example shows how to use i2c driver as master to do board to board transfer with interrupt:In this example, one i2c instance as master and another i2c instance on the other board as slave. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.
Download Pack -
lpc_i2c_interrupt_b2b_transfer_slave
Keil Studio, µVision AC6The i2c_interrupt_b2b_transfer_slave example shows how to use i2c driver as slave to do board to board transfer with interrupt:In this example, one i2c instance as slave and another i2c instance on the other board as master. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.
Download Pack -
lpc_i2c_interrupt_b2b_transfer_slave
Keil Studio AC6, GCC, IARThe i2c_interrupt_b2b_transfer_slave example shows how to use i2c driver as slave to do board to board transfer with interrupt:In this example, one i2c instance as slave and another i2c instance on the other board as master. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.
Download Pack -
lpc_i2c_polling_b2b_master
Keil Studio, µVision AC6The i2c_polling_b2b_master example shows how to use i2c driver as master to do board to board transfer using polling method:In this example, one i2c instance as master and another i2c instance on the other board as slave. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.
Download Pack -
lpc_i2c_polling_b2b_master
Keil Studio AC6, GCC, IARThe i2c_polling_b2b_master example shows how to use i2c driver as master to do board to board transfer using polling method:In this example, one i2c instance as master and another i2c instance on the other board as slave. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.
Download Pack -
lpc_i2c_polling_b2b_slave
Keil Studio AC6, GCC, IARThe i2c_polling_b2b_slave example shows how to use i2c driver as slave to do board to board transfer with a polling master:In this example, one i2c instance as slave and another i2c instance on the other board as master. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.
Download Pack -
lpc_i2c_polling_b2b_slave
Keil Studio, µVision AC6The i2c_polling_b2b_slave example shows how to use i2c driver as slave to do board to board transfer with a polling master:In this example, one i2c instance as slave and another i2c instance on the other board as master. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.
Download Pack -
mrt_example
Keil Studio, µVision AC6The MRT project is a simple demonstration program of the SDK MRT driver. It sets up the MRThardware block to trigger a periodic interrupt after every 250 milliseconds. When the PIT interrupt is triggereda message a printed on the UART terminal and an LED is toggled on the board.
Download Pack