FRDM-KE17Z
-
Core
Cortex-M0+
-
Device
MKE17Z256VLL7 -
CMSIS Pack
FRDM-KE17Z_BSP
-
tsi_v5_mutualmode
Keil Studio, µVision AC6The tsi_v5_mutualmode demo shows how to use TSI_V5 driver in mutual-cap mode:In this example , available electrodes on FRDM-TOUCH board are used to show how to realize touch key.1. Firstly, get the non-touch calibration results as baseline electrode counter;2. Then, start the periodical Software-Trigger scan using polling method to detect finger touch;3. Wait for the electrodes touched and deal with the event.
Download Pack -
tsi_v5_self_cap
Keil Studio AC6, GCC, IARThe tsi_v5_self_cap example shows how to use TSI_V5 driver in self-cap mode:In this example , we make use of the available electrodes on board to show driver usage.1. Firstly, we get the non-touch calibration results as baseline electrode counter;2. Then, we start the Software-Trigger scan using polling method and interrupt method;3. Then, we start the Hardware-Trigger scan using interrupt method.
Download Pack -
tsi_v5_self_cap
Keil Studio, µVision AC6The tsi_v5_self_cap example shows how to use TSI_V5 driver in self-cap mode:In this example , we make use of the available electrodes on board to show driver usage.1. Firstly, we get the non-touch calibration results as baseline electrode counter;2. Then, we start the Software-Trigger scan using polling method and interrupt method;3. Then, we start the Hardware-Trigger scan using interrupt method.
Download Pack -
tsi_v5_selfmode
Keil Studio AC6, GCC, IARThe tsi_v5_selfmode demo shows how to use TSI_V5 driver in self-cap mode:In this example , available electrodes on board is used to show how to realize touch key.1. Firstly, get the non-touch calibration results as baseline electrode counter;2. Then, start the periodical Software-Trigger scan using polling method to detect finger touch;3. Wait for the electrodes touched and deal with the event.
Download Pack -
tsi_v5_selfmode
Keil Studio, µVision AC6The tsi_v5_selfmode demo shows how to use TSI_V5 driver in self-cap mode:In this example , available electrodes on board is used to show how to realize touch key.1. Firstly, get the non-touch calibration results as baseline electrode counter;2. Then, start the periodical Software-Trigger scan using polling method to detect finger touch;3. Wait for the electrodes touched and deal with the event.
Download Pack -
wdog32
Keil Studio AC6, GCC, IARThe WDOG32 Example project is to demonstrate usage of the KSDK wdog32 driver.In this example, fast testing is first implemented to test the wdog32.After this, refreshing the watchdog in None-window mode and window mode is executed.Note wdog32 is disabled in SystemInit function which means wdog32 is disabledafter chip emerges from reset.
Download Pack -
wdog32
Keil Studio, µVision AC6The WDOG32 Example project is to demonstrate usage of the KSDK wdog32 driver.In this example, fast testing is first implemented to test the wdog32.After this, refreshing the watchdog in None-window mode and window mode is executed.Note wdog32 is disabled in SystemInit function which means wdog32 is disabledafter chip emerges from reset.
Download Pack