The flexio_spi_master_edma_dspi_slave example shows how to use flexio spi master driver in edma way:In this example, a flexio simulated master connect to a dspi slave .

The flexio_spi_slave_edma_dspi_master example shows how to use flexio spi slave driver in dma way:In this example, a flexio simulated slave connect to a dspi master.

The flexio_spi_master_interrupt_dspi_slave example shows how to use flexio spi master driver in interrupt way:In this example, a flexio simulated master connect to a dspi slave .

The flexio_spi_slave_interrupt_dspi_master example shows how to use flexio spi slave driver in interrupt way:In this example, a flexio simulated slave connect to a dspi master.

The flexio_uart_edma example shows how to use flexio uart driver in edma way:In this example, a flexio simulated uart connect to PC through USB-Serial, the board will send back all charactersthat PC send to the board.

The flexio_uart_interrupt_ring_buffer example shows how to use flexio uart driver in interrupt way withRX ring buffer enabled:In this example, a flexio simulated uart connect to PC through USB-Serial, the board willsend back all characters that PC send to the board.Note: The example echo every 8 characters, so input 8 characters every time.

The flexio_uart_interrupt example shows how to use flexio uart driver in interrupt way:In this example, a flexio simulated uart connect to PC through USB-Serial, the board will send back all charactersthat PC send to the board. Note: two queued transfer in this example, so please input even number characters.

The flexio_uart_polling example shows how to use flexio uart driver in polling way:In this example, a flexio simulated uart connect to PC through USB-Serial, the board will send backall characters that PC send to the board.

The FTM project is a demonstration program of generating a combined PWM signal by the SDK FTM driver. It sets up the FTMhardware block to output PWM signals on two TPM channels. The example also shows the complementary mode of operationand deadtime insertion.On boards that have 2 LEDs connected to the FTM pins, the user will see a change in LED brightness.And if the board do not support LEDs to show, the outputs can be observed by oscilloscope.

The FTM project is a demonstration program of the SDK FTM driver's dual-edge capture feature.This feature is available only on certain SoC's.The example sets up a FTM channel-pair for dual-edge capture. Once the input signal is received,this example will print the capture values and period of the input signal on the terminal window.