EVK-MIMXRT1060
-
Core
Cortex-M7
-
Device
MIMXRT1062DVL6A -
CMSIS Pack
EVK-MIMXRT1060_BSP
-
snvs_sw_zmk
Keil Studio, µVision AC6The SNVS SW ZMK project shows how to provision the zeroizable master key (ZMK) by software based on SDK SNVS driver. In this example, ZMK key value is set and ECC is enabled. When change the ZMK key value, violation detected and ZMK key is zeroized.
Download Pack -
src_reset_source
Keil Studio, µVision AC6The src_reset_source example shows how to check the reset source and boot option with SRC driver.When run this example firstly on the board after power up, the POR reset or IPP reset flag would be asserted. But when running it again, the flag would be cleared, since it is no longer a reset.Usually, the reset flags are used and cleared by ROM code or bootloader to check which reset occurred. With the boot mode words, the initial boot code would go to the right way to execute the start code. For example, when the SoC is waked up from some low power mode, all necessary data are already staying in the RAM, the CPU would not have to reload the program to RAM and execute the application directly.
Download Pack -
temperaturemonitor
Keil Studio, µVision AC6The TEMPMON project is a simple demonstration program of the SDK TEMPMON driver.The temperatue monitor (TEMPMON) module features alarm functions that can raise independent interrupt signals if the temperature is above two high-temperature thresholds and below a low temperature threshold, the system can then use this module to monitor the on-die temperature and take appropriate actions such as throttling back the core frequency when a the high temperature interrupt is set.
Download Pack -
temperaturemonitor
Keil Studio AC6, GCC, IARThe TEMPMON project is a simple demonstration program of the SDK TEMPMON driver.The temperatue monitor (TEMPMON) module features alarm functions that can raise independent interrupt signals if the temperature is above two high-temperature thresholds and below a low temperature threshold, the system can then use this module to monitor the on-die temperature and take appropriate actions such as throttling back the core frequency when a the high temperature interrupt is set.
Download Pack -
tflm_cifar10
Keil Studio AC6, GCCCIFAR-10 example for TensorFlow Lite Micro
Download Pack -
tflm_cifar10
Keil Studio, µVision AC6CIFAR-10 example for TensorFlow Lite Micro
Download Pack -
tflm_label_image
Keil Studio AC6, GCCLabel image example for TensorFlow Lite Micro
Download Pack -
tflm_label_image
Keil Studio, µVision AC6Label image example for TensorFlow Lite Micro
Download Pack -
tflm_modelrunner
Keil Studio AC6, GCCModelRunner for TFlite
Download Pack -
threadx_module_manager
µVision AC6The ThreadX Module Manager example.
Download Pack