MCB1500

Keil MCB1500 Board Support and Examples

• Debug Interfaces
  JTAG/SW	20 pin JTAG (0.1 inch connector)
  JTAG/SW	10 pin Cortex debug (0.05 inch connector)
  CMSIS-DAP	USB Standard-B

• Debug
  Integrated Debug Adaptor	1 x On-board CMSIS-DAP

• Other
  Crystal Oscillator	12 MHz Crystal Oscillator

• Power
  Power Supply	5 V .. 0 V USB Powered
  Battery	1 x CR2032 Battery for RTC

• Controls
  Push-buttons	2 Push-buttons: DAP USB-ISP and Reset
  Joystick	1 x 5-position Joystick
  Potentiometer	1 x Potentiometer

• Connectors
  USB	1 x Full-Speed USB device with USB Standard-B Connector
  RS232	1 x DB9 Female Connector
  CAN	1 x DB9 Male Connector
  Prototyping Area	4 x 8 PORT0 Prototyping Area with 2.54 mm pitch
  Prototyping Area	4 x 8 PORT1 Prototyping Area with 2.54 mm pitch
  Prototyping Area	4 x 3 PORT2 Prototyping Area with 2.54 mm pitch
  Other Connector Type	1 x JTAG Interface
  Other Connector Type	1 x Cortex Debug Interface
  Other Connector Type	2 x Motor Control Connectors

• Display
  GLCD	240 x 320 2.4 inch QVGA Touchscreen Display
  LEDs	6 x LEDs: Four user, one USB PWR LED, one DAP PWR LED, one DAP UART LED, two DAP HID/MSD LEDs

• I/O
  Digital I/Os	76 x Digital IOs (shared with Analog IOs)
  Analog I/Os	24 x Analog IOs (shared with Digital IOs)

• Memory
  SD/microSD/MMC Card Holder	1 x Micro SD Card Holder

• Form factor
  Custom Formfactor	100 mm x 130 mm, Custom Formfactor