1. Boards
  2. MCB4300

MCB4300

Ver 1.3
Keil
MCB4300

Keil MCB4300 Development Board

  • Debug Interfaces
    JTAG/SW 20 pin JTAG (0.1 inch connector)
    JTAG/SW 10 pin Cortex debug (0.05 inch connector)
    JTAG/SW 20-pin Cortex debug + ETM Trace (0.05 inch connector)
  • Other
    Crystal Oscillator 12 MHz Crystal Oscillator
  • Power
    Power Supply 5 V - 0 V USB Powered
    Power Supply 8 V - 12 V External Power Supply
  • Memory
    RAM 1 x 16 MB SDRAM
    Flash 1 x 16 MB NOR Flash
    Flash 1 x 4 MB Quad-SPI Flash
    Flash 1 x 16 kB EEPROM
    SD/microSD/MMC Card Holder 1 x microSD Card Holder
  • Connectors
    USB 1 x USB 2.0 High-speed Host/Device/OTG interface (USB host + Micro USB Device/OTG connectors)
    USB 1 x USB 2.0 Full-speed Host/Device interface (USB host + micro USB Device connectors)
    CAN 1 x CAN
    RS232 1 x RS232
    Ethernet 1 x 0 bit/s 10/100 Ethernet Port
    Other Connector Type 1 x On-board Speaker
  • Display
    GLCD 240 x 320 2.4 inch Color QVGA TFT LCD with resistive touchscreen
    LEDs 8 x I/O Port LEDs
  • Controls
    Potentiometer 1 x Potentiometer for ADC Input
    Push-buttons 6 Push-Buttons: 3 x GPIO, Reset, ISP, WAKEUP
  • Audio
    Line In 2 x Audio CODEC with Line-In/Out and Speaker/Microphone
    Line Out 2 x Audio CODEC with Line-In/Out and Speaker/Microphone
  • Form factor
    Custom Formfactor 124 mm x 170 mm, Custom Formfactor